User Manual
Ozone Laundry Systems
Before using this ozone laundry system, please read this manual carefully.
PRECAUTIONS:
1.It is forbidden to use this product for children under 16 or people with mental disabilities.
Remember:
Features and Functions:
Disinfection
- Reduce 100% use of Detergents.
- Remove 99.9% of germs, viruses and bacteria.
- Improves dermatitis, psoriasis,etc...
Purify
- Without chemicals elements.
- Without heavy plastic containers.
Clean and smooth
- Remove bad odors.
- Reduces superficial wrinkles.
- More intense colors.
- Whiter whites.
Environmental Protection
-Eco-friendly environment.
-100% ecological.
-Intelligent and low power consumption.
-Economic.
-No detergent or fabric softener.
-With cold or hot water up to 40 ° C.
Applications of Ozone Laundry Systems
This ozone laundry system can work with all laundry machines, including top and front loaders. Cold water flows directly through the laundry system with OZONE (O3), where an ozone generator converts oxygen (O2) to ozone (O3).
O3 has very good water solubility and mixes easily with water. With this new cleaning method, clothes are clean, free of dirt, chemicals, odors, etc.
1.Sterilization: destroying a huge variety of bacteria and viruses efficiently, and without secondary contamination. You can use it for WASHING/LAUNDRY MACHINE, KITCHEN AND GENERAL CLEANING OF ALL KINDS OF SURFACES.
2.Deodorization and Degreasing: Remove odors and grease on any surface.
3.Remove chemicals, protecting the environment and no secondary pollution.
4.Easy to complete installation in 10 minutes.
USES: general and personal cleaning, cooking, disinfection of nipples and pacifiers, cavities and bad breath, acne, dandruff, cuts and burns …
Accessories:
Power adapter;
Outlet hose: (connected with washing/laundry machine)
Another hose with auxiliary tap
Wall mount adapter

Equipment and Lights Indications:
Installation:
1.It shall be fixed to the wall, left over the tap. First, fix the metal plate on the wall. The metal plate has three mounting holes, along with 3 anchor screws in order to support this product properly.
2.Before installation, do not open the unit. There are 3 sockets on the bottom of the unit. Place the 3 jacks in the holes in the metal plate, pull down slowly, and then hang the unit on the metal plate.
3.Make sure the metal plate is horizontal. Tilted installation may affect the operation and display of this product.
4.Connect the water inlet on the machine to the water tap and connect the water with the supplied hose. Make sure the rubber cables are properly installed at both ends of the connection. Properly connect the hose to the inlet fitting, but do not over tighten.
5.Put the supplied power adapter into the DC adapter plug on the side of the unit, and then plug the adapter into the power outlet. Unplug the power adapter when not using the unit.
Operation:
Two requirements:
-The unit requires 12 volts of power, 50 / 60Hz and a 15 amp fuse or switch.
-Water pressure between 40 and 80 Psi is required for operating the unit properly. The quality of the water could affect the operation.
System configuration:
1.Turn on the water valve / faucet. Check that the connection is correct to make sure there are no drips or leaks. If necessary, tighten the hose connections, only as necessary. Caution without being over tightened.
2.Plug in the power adapter and turn on the water. When the water is flowing, the tap light and ECOSU will be turned on, flashing the light.
Technical specifications:
|
Model |
Lux001C(Two Tubes) |
|
Dimensions |
500 * 350 * 77mm |
|
Ozone level |
0.5-1.2mg / L |
|
Input / Power Consumption |
AC100-240V / 50-60Hz |
|
Output / Power Consumption |
DC12V / 3A / 36W |
|
Operating temperature |
Cold water - maximum 40ºC |
|
Water flow |
8-22L / minute |
|
Net Weight |
5.5Kg |
|
Water pressure |
29-80Psi |
Application:


Factory display:
